Tumma

FIRST TEST DRIVE! - 4x4 Off-Road UTV Build Ep.25 

Tilaa
Näkymät 674 t.
97% 14 000 303

Fabricating air intake, routing brake lines and bleeding brakes, fabricating front propshaft and finally test driving this beast for the first time. :)

This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question "Why?" but for those who want to ask "why don't you just buy a side-by-side instead of building one?" I just want to say - I'm not made of money. Side-by-sides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.

"How much HP will it have?" - the 1.4 litre FWD petrol engine I'm planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I'm using to transfer power to front and rear axles.

"It will be too heavy!" - this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.

Stay tuned for future episodes! Thanks for watching!

My other videos: fiplace.info


Soundtrack:
Pomade - Silent Partner (FIplace Audio Library)

Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

Julkaistu

 

30.04.2021

Jaa:

Jaa:

Ladata:

Ladataan.....

Lisää soittolistaan:

Oma soittolista
Katso myöhemmin
Kommentteja 0   
Donn DIY
Donn DIY Uukausi sitten
More fabrication videos on fiplace.infovideos
Brantley Bode
Brantley Bode 27 päivää sitten
@Hugh Denver yea, I have been using flixzone for years myself :)
Hugh Denver
Hugh Denver 27 päivää sitten
Pro trick: you can watch movies on Flixzone. Me and my gf have been using it for watching lots of of movies these days.
Ulil Amri
Ulil Amri 27 päivää sitten
@Владелец жёлтой копейки C
Jimmy in Mexico
Jimmy in Mexico Uukausi sitten
@James Killeen a trailer that can carry the UTV and also be pulled by the UTV
Jimmy in Mexico
Jimmy in Mexico Uukausi sitten
This is really awesome. I wanted to see the PTO work. It was very nice to see it drive and get around so well. You really did a good job with the gearing and everything.
MihaNik
MihaNik 3 päivää sitten
very litle))
Donn DIY
Donn DIY 3 päivää sitten
Purposely built so compact to compete with my ATV in manouverability.
osvaldo camoes
osvaldo camoes 5 päivää sitten
Interesting to got one
E Thorn
E Thorn 6 päivää sitten
Wow very nice build
Robert Fuller
Robert Fuller 7 päivää sitten
Dude you are the man.
philip streechon
philip streechon 9 päivää sitten
Nice work
Asal Usul
Asal Usul 9 päivää sitten
Wihhh keren
valy buggy
valy buggy 10 päivää sitten
Super
Nico Nemba
Nico Nemba 12 päivää sitten
Industrial skill 👍
askjk fhsadlkfjh
askjk fhsadlkfjh 14 päivää sitten
This project is exactly like the dp1 except it's a tractor instead of a go kart
Markku Taskinen
Markku Taskinen 14 päivää sitten
Super
stevenwithanS
stevenwithanS 15 päivää sitten
Awesome. A lot stronger than any mass produced junk available today.
Toomas Nuuter
Toomas Nuuter 15 päivää sitten
Petu küttepuude müük. Ruum puid ei ole (tsaari standardi järgi) suvaliselt segi loobitud halud 1m3 mahus vaid LAOTUD halud. Laotult mahuks neid segi loobitud halge vaevu 3/4 sinna 1m3 - sse.
Toomas Nuuter
Toomas Nuuter 15 päivää sitten
@Donn DIY sel juhul sorry. Mind on see alati närvi ajanud - olen sunnitud uue standardi järgi neid puid ostma ))
Donn DIY
Donn DIY 15 päivää sitten
Küttepuude müük? Need küttepuud on mul omatarbeks.
Sabur Ismailov
Sabur Ismailov 17 päivää sitten
.
SportTruck
SportTruck 18 päivää sitten
Why buy a ATV when you can build your own as well...very nice project.
Donn DIY
Donn DIY 17 päivää sitten
Thank you! That's what I thought myself when started building it. 😁
Herbert Seidl
Herbert Seidl 19 päivää sitten
Absolute coole Kiste, fanfaktor 100% 💪👍🍻
Donn DIY
Donn DIY 19 päivää sitten
Danke!
Asghar Ali
Asghar Ali 19 päivää sitten
Very good... Nice work
Donn DIY
Donn DIY 19 päivää sitten
👍💪
Stan W
Stan W 21 päivä sitten
Awesome little bug out vehicle
Donn DIY
Donn DIY 21 päivä sitten
Cheers man!
Greg Feneis
Greg Feneis 22 päivää sitten
It's a diesel?
Donn DIY
Donn DIY 21 päivä sitten
Nope. 😁
Wayne St.croix
Wayne St.croix 22 päivää sitten
Would have been more efficient if you put a gas pedal
Donn DIY
Donn DIY 22 päivää sitten
As of now it has a connected gas pedal.
Marco Cortes
Marco Cortes 23 päivää sitten
Primoo😀Eres un Gran Mecánico😃 tu trabajo lo confirma. Esta chingon tu proyecto 4×4👍 maravilloso, saludos de Mexico😀
Dave Dave
Dave Dave 23 päivää sitten
Nice work.
Donn DIY
Donn DIY 23 päivää sitten
Thank you!
rodney cassidy
rodney cassidy 23 päivää sitten
Awesome build man. I know nothing about that engine but it sounds like it may need the valves adjusted.
Donn DIY
Donn DIY 23 päivää sitten
Yep, correct.
Mi Dixie Wrecked
Mi Dixie Wrecked 24 päivää sitten
It carries only one person and the steering wheel is on the wrong side.
Hermann Wiedmann
Hermann Wiedmann 24 päivää sitten
Es gibt nur einen Satz der zum Video passt, Hat ER gut gemacht!!!
Donn DIY
Donn DIY 24 päivää sitten
Danke!
RogerM
RogerM 26 päivää sitten
Great build. But for the casual person...easier to buy a compact 4wd, gut the interior, remove the doors, and build a cage around it.
Rasmus Haggblom
Rasmus Haggblom Uukausi sitten
Its looking rad!!!
Donn DIY
Donn DIY Uukausi sitten
Cheers man!
Alex Santos
Alex Santos Uukausi sitten
Top
Jesse
Jesse Uukausi sitten
ummm.. cool?
Sergio Muniz
Sergio Muniz Uukausi sitten
Es Diesel?
MOTOFLIX
MOTOFLIX Uukausi sitten
Wow ... I am speechless
John Krakatoa
John Krakatoa Uukausi sitten
Man it looks amazing! Nicely designed!
Jako Arras
Jako Arras Uukausi sitten
Väga lahe sõiduk. Palju sa selle masina ehitamisel aega kulutanud oled?
Donn DIY
Donn DIY Uukausi sitten
Pean kulunud aja alles kokku lööma. Hetkel jään vastuse võlgu.
james dalton
james dalton Uukausi sitten
Jump it n then you know 😂 It's Some Machine 👍
iBlackLagoon
iBlackLagoon Uukausi sitten
Just buggy version of cat telehandler
Pete W
Pete W Uukausi sitten
As a fabricator in the UK with 42 years experience you are a talented guy, good work my friend. Only negative comment... don't weld with bare arms and hands !
Furkan Fidan
Furkan Fidan Uukausi sitten
Mühendislik hatası var amk. Motor hiç yanda olur mu aşırı dengesiz gider bide bu araç küçük çaplı off road yapacak önde veya arkada. Olmalıydı motor
Андрей
Андрей Uukausi sitten
ДОНН, ты красавчик! Такой аппарат собрал! Столько труда, ресурсов, и сил! Молодчага!💪👍🤝
Infinity_city_78
Infinity_city_78 Uukausi sitten
3TUZ ?
Nikolche niko
Nikolche niko Uukausi sitten
Nicely done, but i don't like the engine next to the driver seat, it should be in front or back
Nữ Quách
Nữ Quách Uukausi sitten
I(
MagistrSema Tiun
MagistrSema Tiun Uukausi sitten
This is a great difference between DonnDIY chdnnel and ВАЛ channel (валканал). Here we see that all parts of dashboard is working truly. But on the Russian's chanell... Nothing is working. Except engine and brakes
nature green
nature green Uukausi sitten
Salute Sir
Andrei Mihalcea
Andrei Mihalcea Uukausi sitten
Nice ! Which its top speed?
Andrei Mihalcea
Andrei Mihalcea Uukausi sitten
@Donn DIY i have thing too to build one. The perfect one will be with one multitronic gearbox. But you have done a verry good work !
Andrei Mihalcea
Andrei Mihalcea Uukausi sitten
@Donn DIY this its why you should use one motor from suzuki vitara ...or something like this.
Donn DIY
Donn DIY Uukausi sitten
Slow. 😁
Григорий Патрин
Наконец дождался выезда! Ура! Хотя за работой тоже приятно наблюдать.
Jason Appleton
Jason Appleton Uukausi sitten
Very cool build.
Στελιος Μ
Στελιος Μ Uukausi sitten
BRAVO excellent work. the transmission it would be better automatic
Rebel Fabrication
Rebel Fabrication Uukausi sitten
Nice work man! Seems to work really well!
swatson0061
swatson0061 Uukausi sitten
Awesome
69kaveman
69kaveman Uukausi sitten
The steering wheel is on the wrong side!
Donn DIY
Donn DIY Uukausi sitten
Actually, it's on the right side, not left.
Guy Brick
Guy Brick Uukausi sitten
You have done AWESOME!!! That is so cool to be able to build something like that from the ground up.
messias do grau
messias do grau Uukausi sitten
Top
Michael Francis
Michael Francis Uukausi sitten
That's a remarkable vehicle, I'm in awe. Congratulations on your first drive.
quin
quin Uukausi sitten
Düşünsene yapımı bittikten sonra kapıdan geçmiyomuş. 😂😂 harika olmuş emeğine sağlık.
مستر حيدوري
مستر حيدوري Uukausi sitten
ما شاء الله الله يرزقك
Curtis Tucker
Curtis Tucker Uukausi sitten
Pretty interesting build you definitely have skills, but you might consider checking your valve clearances to get rid of some of that top end clatter.
Ans
Ans Uukausi sitten
Tienes que hacer un tractor cortacésped que recoja la hierba!!!
puncher davis
puncher davis Uukausi sitten
Exhaust sounds like a bubble maker bubble bubble bubble and Great a great Job Donn !!
Seraphin De Oliveira
Seraphin De Oliveira Uukausi sitten
les premiers essais ce passe bien
Руслан Вокин
Ну наконец то!!!!👍🔥
Honda EP3
Honda EP3 Uukausi sitten
Gawd. Hope u cleaned those shaving out that intake pipe after you drilled. Lmao. Or let the motor clean it out
NO1 GAMER
NO1 GAMER Uukausi sitten
Test final speed
Музыка Детская
Hello class video! Super
Музыка Детская
See my videos, maybe you will like something! If you do not like it, I will not be offended. I will not make mistakes in the next one. Please
britt vanegas
britt vanegas Uukausi sitten
They should make all utvs and atvs with manual transmissions. Cvt I like it but it's bullshit
A Guy & A Shed
A Guy & A Shed Uukausi sitten
nice build
RideNV
RideNV Uukausi sitten
Nothing is more permanent than a temporary solution.
Donn DIY
Donn DIY Uukausi sitten
Yes, for some reason I know it too well. 😁
جزيرة العرب الحربي
فنان👍👍👍👍
Jwy2063
Jwy2063 Uukausi sitten
👍🏻👍🏻 Nice UTV Donn ! Will sure come in handy I promise ya, I built one acouple of yrs back, "same tires", 4x4 , from an Arctic Cat for my LiL Hobby farm and still using it today. Very handy and reliable ! Nice job buddy 👍🏻👍🏻✌🏻💪🏻
Montenegro ZETA
Montenegro ZETA Uukausi sitten
Unefficient design with space just for driver
Robert Jordan
Robert Jordan Uukausi sitten
Seat is on the wrong side! Looks great So impressed
Donn DIY
Donn DIY Uukausi sitten
If you think about it... it is actually on the right side. 😉
John Hayes
John Hayes Uukausi sitten
You should build more on the driver side to distribute the weight
John Hayes
John Hayes Uukausi sitten
Ahh. Dandy
Donn DIY
Donn DIY Uukausi sitten
It is already balanced including the weight of fuel tank, fuel, battery and myself opposed to the weight engine, transmission, radiator, air box.
Seth Burggraf
Seth Burggraf Uukausi sitten
My God please put street tires on and autox it one time just for shits. It's amazing. Congratulations!!!
Green Giant
Green Giant Uukausi sitten
Pretty good!!!
Fattlas
Fattlas Uukausi sitten
estonia?
Fattlas
Fattlas Uukausi sitten
Normalna
Donn DIY
Donn DIY Uukausi sitten
Yes / jah.
Юрий Сизенцов
Молодец круто💪💪💪Давай ещё что нибудь делай👍👍👍👍
Ocean View Tree Services
So cool 👍🏻
PUTU BAJANG
PUTU BAJANG Uukausi sitten
keren bosku 👌👌
Andrei Kravets
Andrei Kravets Uukausi sitten
УСПЕХОВ ТЕБЕ... С УВАЖЕНИЕМ КРАВЕЦ АНДРЕЙ... 😎
Andrei Kravets
Andrei Kravets Uukausi sitten
КРАСАВЧИК... МОЛОДЦОМ...
Liviu Colesnicov
Liviu Colesnicov Uukausi sitten
Fantastic work. I've watched all the videos and I like the final product. Great job. I have just one curiosity. I know that you cannot put a price on something build by your own hand, but I am curious how much money have been spent on this UTV, not considering the work and the parts from the old van? Just the new parts and the metal involved.
Donn DIY
Donn DIY Uukausi sitten
Amount of money spent on new parts and steel is around 1000 EUR at the moment (half of it was spent on the tires), not including my own work or the donor car.
WITO SARLAW
WITO SARLAW Uukausi sitten
Mantap bang saya juga lagi bikin mini buggy...🙏😁😊
BGM Master
BGM Master Uukausi sitten
👍👍👍👍👍👍👍👍
ECM Мото Ремонт Александр
Вес наверн килограмм 700...
Taylor Nehls
Taylor Nehls Uukausi sitten
I love how you used a transverse mounted engine as a transfer case. That solves soooo many issue in 4x4 fab
Donn DIY
Donn DIY Uukausi sitten
This is nothing new - people have built vehicles with such drivetrain layout for decades. But I share your opinion on it thay it's just genius. 😁
inventa tudo invenções
🤝👏👏👏👏
Peter McCuskey
Peter McCuskey Uukausi sitten
Beautiful work
Chafik Oulmi
Chafik Oulmi Uukausi sitten
Congratulations, I have followed you since the first episode ..
Ben Mcintyre
Ben Mcintyre Uukausi sitten
Brilliant work Donn. It never ceases to amaze me that people feel the need to criticise! I'd like to see them put together a project like this as quickly as you do! Very well done. Love the channel and always great to see your ideas. Good on you for having a go! Cheers from Australia ;)
puridade1
puridade1 Uukausi sitten
great
TBD vlogs
TBD vlogs Uukausi sitten
I'm from Vietnam, nice to know you, and have a passion for mechanics 👍👍
Justin Deckard
Justin Deckard Uukausi sitten
I wish u would have done a pto for Bush hog or small tractor 🚜 accessories
Donn DIY
Donn DIY Uukausi sitten
It has a PTO. Propshaft driven though. Implements will come.
Justin Deckard
Justin Deckard Uukausi sitten
Still love it thi
Andrew MacCormack
Andrew MacCormack Uukausi sitten
Donny is such an inspiration to so many, I think he's the coolest guy on the internet, this vehicle is awesome. I can't wait for the next project.
Marty V
Marty V Uukausi sitten
Congrats!! 👍10:12 face says "I love it when a plan comes together" , just a cigar missing haha :D
Donn DIY
Donn DIY Uukausi sitten
Cheers man! Exactly!
배바우
배바우 Uukausi sitten
👍👍👍👍👍👍👍👍👍👍
TelepaykaShow
TelepaykaShow Uukausi sitten
Donn DIY - What's the next PROJECT ?? Какой следующий ПРОЭКТ??
TelepaykaShow
TelepaykaShow Uukausi sitten
@Donn DIY ок😉
Donn DIY
Donn DIY Uukausi sitten
Finishing this project first. Then new projects. 😉
Art Szabo
Art Szabo Uukausi sitten
Awesome, as usual Donn. Once I realize how much there is to one of these machines I appreciate the factory made units more. Art
Brenton Paterson
Brenton Paterson Uukausi sitten
Phase 2, rear steer.
D S
D S Uukausi sitten
The steering wheel is on the wrong side😂
MrKsmith65
MrKsmith65 Uukausi sitten
Outstanding build, I believe that I have watched all episodes. Very Cool!
Donn DIY
Donn DIY Uukausi sitten
Cheers man!
Roberto Zalazar
Roberto Zalazar Uukausi sitten
Felicitaciones geniooo!!! Una belleza la bestia..!!!
Seuraava
Homemade 17hp Weelbarrow
27:38
Näkymät 364 t.
Penkityspäivä 2 | 04-2021
14:54
Sjk Summer Meeting 11.6.2021
13:22
$800 Kawasaki KFX 700 Quad
50:51
Homemade Metal Band Saw
24:35
Näkymät 2 milj.
Homemade ALL-TERRAIN VEHICLE.
21:41
Penkityspäivä 2 | 04-2021
14:54
Sjk Summer Meeting 11.6.2021
13:22